How To Change Hulu Profiles On Vizio Smart Tv

For years, 1 of the best things about Vizio TVs has been the power to ignore their SmartCast software.

Turning on the Tv would ever accept you directly to your last input, so you could use a separate streaming histrion, game console, or cablevision box without needing to navigate through any smart Television set software menus. If you just wanted to use your smart TV as a dumb Telly, Vizio was happy to oblige.

Unfortunately, Vizio has now decided to change that behavior, with a late 2021 firmware update that makes SmartCast the default input whenever you plough on the Goggle box. Vizio's firmware besides switches the Tv set back to SmartCast automatically after 10 seconds when it detects no signal on other inputs, causing actress frustration for folks who use their TVs as computer monitors.

Jared Newman / IDG

With its latest firmware, Vizio really wants you to spend more fourth dimension with SmartCast.

Fifty-fifty if yous use HDMI-CEC to turn on your Television receiver with a cable or streaming remote, Vizio may still override this command and switch dorsum to the SmartCast interface when the Goggle box turns on. There's no good reason to disrespect users' input preferences this way, except equally a cynical ploy to boost "post-purchase monetization" through superfluous smart TV software.

This update appears to affect all Vizio SmartCast TVs, covering most of the company's televisions from 2016 onward. The good news is that you can still restore the old behavior by digging into Vizio'south settings menu.

Avoiding SmartCast on Vizio TVs

Here'south how to switch the default back to your last input instead of Vizio's SmartCast software when turning on the TV:

• Hit the Bill of fare button your remote.
• Head to Organisation > Input at Power On.

Jared Newman / IDG

• Instead of "Automated," select "Previous Input," or choose a specific input to load every fourth dimension.

Jared Newman / IDG

• Turn your TV off, and then on again.

At this point, your Vizio TV should exist dorsum to the way it was, remembering your last input instead of loading the SmartCast interface every time.

You lot might also consider disconnecting your Vizio TV from the internet entirely. Doing then will cut off certain smart Idiot box features, such as Chromecast, AirPlay, and HomeKit support, simply yous'll as well prevent Vizio from installing whatever additional updates that might make the dumb Television set experience whatsoever worse.

Here's how to pull the plug on Vizio'south internet connexion:

• Hit the Bill of fare button on your remote.
• Select "Network."
• Select your connected Wi-Fi network from the listing. (It should have a Wi-Fi icon on its left side.)
• Select "Forget."

Jared Newman / IDG

Alternatively, yous tin factory-reset the Television software past heading to Arrangement > Reset & Admin > Reset to Mill Settings. During setup, select "Skip" when prompted to select your Wi-Fi network, and y'all'll avoid installing SmartCast in the first place.

Source: https://www.techhive.com/article/579967/vizio-smartcast-tv-update-input-switch-fix.html

Posted by: davisonsert1961.blogspot.com

Share this post